2.5 KiB
J6 Bigknob
This is the main firmware for the J6 Bigknob USB-MIDI controller, based on the Teensy platform (Arduino Compatable)
Features
- 4x Keyswitches
- 2x Rotary Encoders
- 1x 3 way switch
- 1x 3.5mm TRS Jack for footpedal
Download
Download + extract the repo to a local folder.
Windows
Then via command line / powershell
Download + Install Arduino IDE https://www.arduino.cc/en/Main/Software
Download + Install Teensyduino https://www.pjrc.com/teensy/td_download.html
D:\Arduino> git clone https://github.com/litruv/BigKnob.git BigKnob
MacOS
Download + Install Arduino IDE https://www.arduino.cc/en/Main/Software
Download + Install Teensyduino https://www.pjrc.com/teensy/td_download.html
Then via terminal
$ git clone https://github.com/litruv/BigKnob.git BigKnob
Linux
Download + Install Arduino IDE https://www.arduino.cc/en/Main/Software
Download + Install Teensyduino https://www.pjrc.com/teensy/td_download.html
$ git clone https://github.com/litruv/BigKnob.git BigKnob
General
If you don't want to download Git, you're free to download it the ol' fashioned way.
Usage
Open BigKnob.ino in Arduino IDE
Edit knob steps as needed (steps per tick)
//Knob Steps
int SmallKnob = 6;
int BigKnob = 1;
Change the board type to Teensy LC
Change the USB type to Serial + MIDI
Might need to change port (I don't need to for mine)
Upload.
Acknowledgements
Portions of this software were developed at http://www.pjrc.com/
Those portions licensed under MIT License Agreement, (the "License"); You may not use these files except in compliance with the License.
You may obtain a copy of the License at: http://opensource.org/licenses/MIT
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissionsand limitations under the License.
Portions Copyright (c) 2012-2018 http://www.pjrc.com/