Umamo Untitled (read-only) Expand Collapse Filters Modelling Texture Physics New Workspace Workspace Rename Duplicate copy Delete Previous Workspace Next Workspace Reset Workspace 2D Viewport UV Editor Outliner Parameters Properties Tool Settings History Logs Sources Copy to Clipboard Export to File… No log output yet Split Left/Right Split Top/Bottom Close Area Change Editor Type File New Open… Save Save As… Open Recent Import Export CMO3… MOC3… Artwork… CMO3… MOC3… Image… New Document Open Document… Save Document Save Document As… Import CMO3… Import MOC3… Import Artwork… Reload Artwork Relink Art Match Artwork Automatically Replace Artwork… Delete Art Export CMO3… Export MOC3… Export Image… Exit Edit Undo Redo Settings… Workspace Reset Workspace Export This Workspace… Export All Workspaces… Import Workspace… Confirm Cancel Discard Reset Replace Overwrite Quit Without Saving Save Don’t Save Reset this workspace to its default layout? Replace all workspaces with the imported file? The document has unsaved changes. Discard them? The document has unsaved changes. Quit without saving? The document has unsaved changes. Save them first? The document has unsaved changes. Save them before quitting? The file was exported, but the following could not be carried into CMO3: The file was exported, but the following could not be carried into MOC3: The atlas was not repacked. These tiles could not be packed: Drawable mesh is larger than the atlas page size. Source artwork layer has no opaque pixels. Source artwork layer is below the minimum opaque coverage. Source artwork layer could not be decoded. Drawable's current placement could not be inverted. Pinned placement does not fit inside the maximum page size. Base geometry or UVs were edited on: %1$s. The export keeps them as authored, but editing those meshes or their atlas in the Cubism Editor may re-derive and corrupt the UV mapping. This model has no source artwork(it came from a MOC3, which stores only packed texture atlases). A stand-in source document was rebuilt from the %1$d atlas page(s), so the file carries the full rig and opens in both Umamo and the Cubism Editor, but every layer in it is a slice of a baked atlas page rather than the artwork this rig was drawn from. Reconcile the original layered artwork(PSD/CLIP/KRA) into this document to export real, editable layers. %1$s share an atlas slot with a twin at another placement and could not be given a slot of their own (the art is larger than an atlas page). The Cubism Editor's layered view shows them at the first twin's placement; the atlas view and the runtime are unaffected. %1$s is not available for the target runtime version, so it was removed from: %2$s. (+%1$d more) Parameter Parameter Group Part Deformer Drawable Glue Document Keyform A drawable with no mesh cannot be written. %1$s is keyed over a narrower span than the object's grid, so it was written as a constant. MOC3 stores one grid per object. A guide-image (sketch) part is not runtime content, so it was left out. The part is hidden and the export options omit hidden parts, so its contents were left out. The drawable is hidden and the export options omit hidden art meshes, so it was left out. An unkeyed drawable under a deformer has no parent-space geometry to write, so it was left out. The canvas-to-parent conversion returned %1$d coordinates for %2$d, so the rest mesh was written unconverted. No atlas page is bound to this drawable, so it was written pointing at page 0. The clipping mask %1$s is not in this export, so the mesh was written unclipped by it. A clipping mask names a drawable that could not be written, so it was dropped from the offscreen. A warp deformer with no control-point grid has no lattice to write. One empty lattice was written in its place so the file stays readable, and everything bound to this deformer collapses to the origin. A rotation deformer with no pivot grid has no transform to write, so the identity transform was written in its place. A glue naming a drawable that is not in this export was dropped. The id does not fit a moc's %1$d-byte id record, so it was written truncated to “%2$s”. The id does not fit a moc's %1$d-byte id record, and truncating it collided with another object's id, so it was written as “%2$s”. There is no matching CMO3 source to reconcile against, so the change was not written. A parameter's kind change (normal / blend shape) is not lowered. A deformer's kind change is not lowered. The CMO3 source is not a warp deformer, so warp-only edits (bilinear mode, lattice, keyforms) were not written. The CMO3 source is not a rotation deformer, so rotation-only edits (base angle, keyforms) were not written. Texture-source rebinding is editor-only state and is not written to CMO3. The base geometry does not match the CMO3 source's vertex count, so it was not written. The drawable has no UVs to reconcile, so none were written. There is no CMO3 part to move the deformer to, so its part was left unchanged. The static draw order is shadowed by its keyform track, so CMO3 cannot store it independently. The composite's static values are shadowed by the part's keyform tracks, so CMO3 cannot store them independently. Part-typed composite masks flatten to their descendant drawables in CMO3. The CMO3 model has no set of this kind to create into, so the new entity was not synthesized. The newly created entity has no CMO3 source yet, so it was left out of the panel order. The created group is not in the edited parameter tree, so it was not synthesized. The created drawable has no texture source to clone, so it was not synthesized. A glued drawable has no CMO3 source, so the glue was not synthesized. The mesh has %1$d vertices, past the %2$d the editable mesh's edge table can index, so the edge table was not rebuilt. A glued mesh has no editable-mesh vertex-id table, so the glue could not be re-bound. A glue pair indexes past its mesh's vertex-id table, so the glue was not re-bound. %1$s CMO3 stores one grid per object. The grid axis parameter %1$s has no CMO3 source, so the keyform grid was not written. The blend-shape parameter %1$s has no CMO3 source, so the blend shape was not written. Keyforms without a base mesh cannot be bundled into CMO3. CMO3 stores a whole-number draw order, so the fractional value was not written. A static glue intensity with no keyforms has nowhere to live in CMO3. Keys outside the geometry's keyed span cannot be bundled into one grid. Channel keys with no geometry cannot be bundled into one grid. Keys outside the %1$s track's span cannot be bundled into one grid. CMO3 stores no authored world origin, so reopening the file derives it from the canvas center. The model has no root parameter group, so the parameter tree was not rebuilt. The model has no root part, so the parts panel order was not rebuilt. The model has no parameter set, so the parameter order was not written. The parameter order was adjusted so the combined pair %1$s + %2$s stays adjacent. The model has no canvas, so the canvas size was not written. This document has no texture manager, so the source-artwork display mode could not be written. This drawable has no texture input for the chosen display mode, so it keeps the one it had. This artwork is not packed onto any atlas page, so there was no placement to update. This artwork was moved on its atlas page, but the page image still shows it at its old spot; repack to redraw it. This artwork's name or size changed, which an atlas placement cannot carry; re-import the artwork instead. This drawable was bound to different artwork, which needs the artwork re-imported rather than repacked. CMO3 stores whole canvas pixels, so the fractional canvas size was not written. Exporting will overwrite %1$d existing file(s): %2$s MOC3 Export Options Export Content Sidecar Files Scale Export hidden parts Export hidden drawables Export sketch parts Physics settings (physics3.json) User data (userdata3.json) Display info (cdi3.json) Pixels per unit Canvas: %1$s × %2$s units Export Image Region Viewport Canvas Visible Content Scale Background Transparent Solid Color Viewport Grid Color %1$d × %2$d px Nothing is visible to capture. No viewport to capture. Point at a 2D viewport before exporting. The document has no canvas. %1$d × %2$d px is past the %3$d px limit. Okay Could not read %1$s. %1$s is not a file format Umamo recognizes. %1$s cannot be opened in the editor yet. Could not open %1$s. The file may be damaged. Could not import %1$s. Its model3.json manifest was not found next to the file. Could not import %1$s. A texture referenced by its model3.json is missing or unreadable. %1$s has no layers with pixels to import. %1$s was made by a newer version of Umamo and cannot be opened by this one. %1$s opened read-only. It holds entries this version of Umamo cannot interpret, so Save is unavailable: %2$s Could not save %1$s. %2$s Could not export %1$s. %2$s The viewport renderer could not draw the image. There was not enough memory for a %1$d × %2$d px image. Try a smaller scale. Help Source Code… Web Site… Documentation… Credits… Quick Setup… About Umamo… About Umamo Version %1$s Licensed under the GNU General Public License v3.0 Credits & Third-Party Licenses Close Fit View Frame All Actual Size (100%) Zoom In Zoom Out Zoom In (Large Step) Zoom Out (Large Step) Zoom Region Clear Selection Select All Invert Selection Toggle Edit Mode Object Mode Edit Mode Grab Vertices Reverse Positions Horizontally Reverse Positions Vertically Scale Vertices Rotate Vertices Vertex Select Mode Edge Select Mode Face Select Mode Box Select Circle Select Grow Circle Radius Shrink Circle Radius Mirror UVs Horizontally Mirror UVs Vertically Mirror X Mirror Y Follow Selection Page %1$d Page %1$d · %2$d × %3$d · %4$d meshes Source Layer Find by Artwork %1$s · %2$d × %3$d · %4$d meshes No artwork matches This document has no source artwork. Toggle Source Artwork Display Repack Atlas Next Texture Page Previous Texture Page Texture Page: Follow Selection Pin Art Placement Unpin Art Placement Undo Redo Adjust Last Operation Toggle Visibility Search Clear search Cut Copy Paste Select All Open Edit Select Change Mode Toggle Part Visibility Rename Part Toggle Part Selectability Move Part Toggle Mesh Visibility Rename Mesh Toggle Mesh Selectability Move Mesh Rename Deformer Toggle Deformer Selectability Move Deformer Insert Keyframe Move Keyframe Remove Keyframe Select Keyframe Select Parameter Adjust Parameter Edit Parameter Range Link Parameters Unlink Parameters Move Parameter Create Group Delete Group Rename Group Add Parameter Rename Parameter Delete Parameter Delete Parameter (Move Keys) Move Vertices Scale Vertices Rotate Vertices Slide Vertex Reverse Positions Reverse Positions Move UVs Scale UVs Rotate UVs Mirror UVs Move Objects Scale Objects Rotate Objects Select Elements Change Select Mode Delete Part Delete Mesh Delete Deformer Toggle Guide Image Set Part Draw Order Set Group Mode Set Composite Set Blend Mode Set Alpha Mode Toggle Back-Face Culling Toggle Invert Mask Set Parent Deformer Set Masks Set Multiply Color Set Screen Color Set Opacity Set Draw Order Set Deformer Opacity Set Deformer Multiply Color Set Deformer Screen Color Set Flip X Set Flip Y Set Part Set Base Angle Toggle Bilinear Warp Change Warp Grid Set Canvas Size Set World Origin Change Texture Display Move Art On Atlas Rotate Art On Atlas Scale Art On Atlas Pin Art On Atlas Unpin Art On Atlas Repack Atlas Relink Art Unbind Art Delete Art Delete Art, Ignore Layer Ignore Layer Stop Ignoring Layer Import Artwork Reload Artwork Relink Art Match Artwork Replace Artwork Set Runtime Target Puppet Armature Parts Deformers Reload Artwork Files Artwork files changed on disk. Reload to take the changes. Match Automatically: Rebind the art whose layers the files no longer have to their best matches. File Actions Replace Artwork… Reload This File Layer Actions Ignore Layer Stop Ignoring Review this binding Accept %1$s (%2$d%) Accept %1$s (%2$d%) and remove its new drawable Relink Manually… Leave for Now Bound Unbound Missing Files Needs Review Present Missing Unknown Bound Bound by name Unbound Unplaced Needs review: The file no longer has this layer Needs review: The layer is empty in the file Needs review: The replacement file has no layer under this key Ignored: A reload never adds this layer Unbound Art %1$s · %2$d layers no path recorded %1$d × %2$d at %3$d, %4$d %1$d × %2$d at %3$s x, %4$s z page %1$d Relink to a Layer Unbind Delete Art No layer matches. Drawables Restriction Toggles Selectable Column Visibility Column Empty Toggle Visibility Toggle Selectability Rename Delete Delete Hierarchy Parts: %1$d Drawables: %1$d Parameters: %1$d Deformers: %1$d Glues: %1$d LMB / Enter: Confirm RMB / Esc: Cancel Edit Mode Visibility Grab Scale Rotate Insert Key Delete Key Pin Select Mode %1$d/%2$d vertices %1$d/%2$d edges %1$d/%2$d faces Verts: %1$d Verts: %1$d/%2$d Tris: %1$d Tris: %1$d/%2$d Nothing transformable in the selection. Deformers are not yet supported. Can't transform while mesh is deformed. Reset all parameters first. Select a drawable or part that has meshes to wrap in a warp deformer. Create Warp Deformer Create Warp Deformer Create Warp Deformer Warp Deformer Create Warp Deformer Action unavailable. Along X Along Z Pivot Point Median Point Individual Origins Active Element 2D Cursor Snap Cursor to World Origin Cursor to Selected Cursor to Active Cursor to Grid Selection to Grid Selection to Cursor Selection to Cursor (Keep Offset) Selection to Active Selection to Pixels Selection to Cursor Selection to Cursor (Keep Offset) Selection to Grid Cursor to Pixels Cursor to Selected Cursor to Grid Select Linked under Cursor Select Linked Frame Selected Switch Edited Mesh Select Hierarchy Select Hierarchy Duplicate Merge Vertices Merge at Center Merge at First Merge at Last Rip Connect Vertices Add Vertex Vertex Slide Duplicate Merge Vertices Rip Connect Vertices Add Vertex Delete Vertex Duplicate Drawable Merge needs two or more selected vertices (vertex mode). Connect needs exactly two selected vertices (vertex mode). Can't connect: The cut crosses nothing, or the geometry is degenerate. Couldn't accept Add Vertex: close a triangle (three edges), then Enter. See Logs for details. Nothing to rip here: The selection has no fan to split. Some drawables have no source artwork and are still displaying from the atlas. All drawables do not have source artwork layers and are displaying from the atlas. Atlas repacked. Artwork imported with notes. See the log. Artwork added. Saving… Saved %1$s. Exporting image… Exported %1$s. A save is already in progress. Waiting on save to finish… Saved as UMA. The CMO3 structure Umamo does not model is not carried in this file; exports from this session still reconcile onto the original. Saved as UMA. Physics, motions, expressions, user data, and pose from the MOC3 family are not carried in this file. The document changed while the artwork was being added; nothing was applied. The file has no layers with pixels to add. Artwork reloaded: %1$d updated, %2$d added, %3$d matched. Artwork reloaded: %1$d updated, %2$d added, %3$d matched, %4$d need review. See the log. Artwork reloaded: %1$d updated, %2$d added, %3$d matched, %4$d need review; some art now reaches past its mesh. See the log. %1$d artwork file(s) changed on disk. Press Reload to take the changes. %1$d artwork file(s) changed since they were last read. Press Reload to take the changes. %1$s is no longer where the document read it. The artwork file(s) have not changed. No artwork file could be read; nothing was reloaded. Art relinked and reloaded. Art relinked; its file could not be read, so the art did not change. %1$d layer(s) matched, %2$d left for review. No binding matched confidently enough; the suggestions are on the rows that need review. Nothing left to match against: every candidate layer is already bound. Adjust Match Threshold on the reload's strip, or relink manually. Artwork replaced: %1$d layer(s) reloaded by key, %2$d matched, %3$d left for review. Repack canceled: the atlas changed while packing. Atlas already packed; nothing changed. The selection has no editable UVs. Nothing is selected to mirror. The puppet's UVs address the source artwork and not the atlas so there is no placement to move. Nothing selected is packed on an atlas page or there is no source artwork. Show an atlas page in the UV editor to move placements. Nothing selected is packed on this page. The atlas cannot be recomposed from its source art, so placements cannot move. Placement overlaps another tile. Repack the atlas to clear the collision. Placement extends past the page edge. The overhang is cropped. Selected tile is pinned. Unpin it to transform it. Nothing to edit, every selected drawable is hidden by a parent. Toggle Proportional Editing Proportional Falloff: Smooth Proportional Falloff: Sphere Proportional Falloff: Root Proportional Falloff: Sharp Proportional Falloff: Linear Proportional Falloff: Constant Smooth Sphere Root Sharp Linear Constant Proportional %1$s · %2$d Proportional editing on. Proportional editing off. Proportional Falloff More Toggle Proportional Connected Only Connected Placement Overlapping Off page Δ %1$d, %2$d px %1$s° ×%1$s Proportional editing: connected only. Proportional editing: all within radius. Pivot Point Snap UV Snap Merge Toggle Toolbar Toggle Sidebar Sidebar Tool and item panels will live here. Parent Part Parent Deformer Masks: %1$d Mesh: %1$d verts, %2$d tris No mesh Grid: %1$d × %2$d Grid X: %1$d Grid Y: %1$d Grid Conversion divisions for the warp lattice (2–16) on each axis. Raising a count adds control points by sampling the current deformation, so the art stays put while the lattice gets denser. %1$d selected No matching properties. Document Object Data Canvas Display Show source artwork Runtime Transform Relations Mesh Texture Blend Deformer Part No canvas Target No Target (All Features) Ayagami (Cubism %1$s Equivalent) Restricted features: All features are available. %1$s - CURRENTLY IN USE New Warp Deformer Method Reversed Mask Blend Shapes (Art Mesh and Warp Deformer) Blend Shape Parameters Multiply Color Screen Color Blend Shapes (Part, Rotation Deformer, Glue) Motion-sync Blend Mode Part Composite (Offscreen Drawing) Parameter Repeat Art Path Texture Source: %1$s Own Atlas Binding Pinned Width Height Origin X Origin Z Position X Position Z Size X Size Z Lock Aspect Ratio Blend Alpha Cull Back Faces Invert Mask Flip X Flip Y Base Angle Bilinear (Quad) Guide Image Draw Order Group Mode Opacity Multiply Color Screen Color Masked By Add Mask… Remove Mask Clear relation Pick from the viewport or outliner. px ° % Max Page Size Gutter Extrude Allow Rotation Keep Pinned Tiles Power-of-Two Pages Square Pages Shrink Pages Alpha Threshold Move X Move Y Angle Scale X Scale Y Move Z Scale Z Proportional Editing Falloff Proportional Size Connected Only Factor Merge At Center First Last Align Offset X Offset Z Alpha Threshold Birth Mesh Margin Top Left Top Top Right Left Center Right Bottom Left Bottom Bottom Right Match Threshold The canvas width, in pixels. Resizing moves only its right edge, so the art stays where it is. The canvas height, in pixels. Resizing moves only its bottom edge, so the art and the world axes stay put while Origin Z changes by the same amount. Where the world axes cross, in pixels from the canvas's left edge. The Position fields measure from these axes. Where the world axes cross, in pixels up from the canvas's bottom edge. The Position fields measure from these axes. Draws each mesh from its original artwork layer instead of the packed atlas. A mesh whose layer the document does not keep still draws from the atlas. The runtime this model is made for. Controls for features it cannot play are hidden, but nothing is removed from the document; only a MOC3 export leaves those features out. The horizontal center of the mesh as it appears in the viewport, measured from the world axes. Editable only while every parameter is at its default. The vertical center of the mesh as it appears in the viewport, measured up from the world axes. Editable only while every parameter is at its default. The width of the mesh as it appears in the viewport, scaled about its center when changed. Editable only while every parameter is at its default. The height of the mesh as it appears in the viewport, scaled about its center when changed. Editable only while every parameter is at its default. The deformer's base rotation, in degrees. The angle each keyform sets is added to it. The part this item belongs to. Clearing it moves the item out of every part. The deformer this item is attached to. The item follows it as it moves, bends, or turns. Holds this art in place on its atlas page. Moving it by hand in the UV editor is refused, and a repack leaves it where it is unless Keep Pinned Tiles is off. Where this mesh stacks, from 0 to 1000: higher draws in front, and a tie goes to the one higher in the outliner. Inside a Grouped or Isolated part, it stacks only among that part's contents. How opaque the mesh is, from 0 (invisible) to 1 (fully opaque). How the mesh's colors mix with what is drawn behind it, like a paint app's layer blend modes. The Legacy modes ignore the Alpha setting. How the mesh's transparency combines with what is behind it. Over stacks normally, Atop draws only over art already there, and Out erases what is behind it instead of drawing. Conjoint and Disjoint change how soft edges overlap. Multiplies the mesh's colors by this color to darken or tint it. White leaves it unchanged. Screens this color over the mesh to lighten it. Black leaves it unchanged. Hides any part of the mesh that a deformation flips over, instead of drawing it mirrored. Clips this mesh to the meshes listed here, so it shows only where they have art. Shows the mesh only where its masks have no art, instead of only where they do. Scales the opacity of everything this deformer moves, nested deformers included, from 0 (invisible) to 1 (unchanged). Multiplies the colors of everything this deformer moves by this color. White leaves them unchanged. Screens this color over everything this deformer moves. Black leaves it unchanged. Bends each lattice cell smoothly between its four corners instead of as two triangles, so the art does not fold along the cell's diagonal. This is the new warp deformer method, which older runtimes cannot play. Mirrors everything this deformer moves left to right, about its pivot. Mirrors everything this deformer moves top to bottom, about its pivot. Marks this part as a guide image, such as a reference sketch. It shows in the editor, but a MOC3 export leaves it and everything in it out. Where the whole part stacks, from 0 to 1000: higher draws in front. Used only when Group Mode is Grouped or Isolated. How the part's contents stack with the rest of the model. Pass Through stacks each mesh by its own draw order, Grouped stacks the whole part at the part's draw order, and Isolated also draws it as one layer with its own opacity, blend, colors, and masks. How opaque the part's combined layer is, from 0 (invisible) to 1 (fully opaque). It applies once to the whole layer, so meshes overlapping inside the part do not show through each other. How the part's combined layer mixes with what is drawn behind it, like a paint app's layer blend modes. The Legacy modes ignore the Alpha setting. How the transparency of the part's combined layer combines with what is behind it. Over stacks normally, Atop draws only over art already there, and Out erases what is behind it instead of drawing. Conjoint and Disjoint change how soft edges overlap. Multiplies the colors of the part's combined layer by this color. White leaves it unchanged. Screens this color over the part's combined layer. Black leaves it unchanged. Clips the part's combined layer to the meshes and parts listed here, so it shows only where they have art. Shows the part's combined layer only where its masks have no art, instead of only where they do. The largest page the pack may use, in pixels. With Shrink Pages on, a page is only this large when the art needs the room. Empty space kept around each piece of art and along the page edge, in pixels, so neighboring art cannot bleed in when the texture is sampled. How many pixels of each piece's edge color are copied outward into the gutter, which hides seams at the art's edges. It cannot be wider than the gutter. Lets the pack turn art a quarter turn to fit more onto a page. Leaves pinned art where it is and packs the rest around it. Turn it off to pack pinned art like everything else. Rounds each page's width and height up to a power of two, such as 1024 or 2048. Makes every page square. Sizes each page to the art it holds instead of always using the maximum page size. How opaque a pixel must be, from 1 to 255, to count as art when the empty border around each piece is trimmed away before packing. How far the art moved right on the page, in pixels. Negative moves it left. How far the art moved down the page, in pixels. Negative moves it up. How far the art turned on the page, in degrees. How much the art was scaled along its own width. 1 leaves it unchanged. How much the art was scaled along its own height. 1 leaves it unchanged. Where the added file's canvas sits on the document's canvas: Top Left lines up their top-left corners, Center centers it, and so on. Moves the added art right from where Align puts it, in pixels. Negative moves it left. Moves the added art up from where Align puts it, in pixels. Negative moves it down. How opaque a pixel must be, from 1 to 255, to count as art when a layer's starting mesh is fitted around it. How far a layer's starting mesh reaches past its visible art on every side, in pixels. How sure a match must be, as a percentage, before a lost layer is relinked to it automatically. Weaker matches are left for review in the Sources panel. How far the selection moved right, in pixels. Negative moves it left. How far the selection moved down the texture, in pixels. Negative moves it up. How far the selection moved up, in pixels. Negative moves it down. How far the selection turned, in degrees. How much the selection was scaled horizontally. 1 leaves it unchanged. How much the selection was scaled vertically on the texture. 1 leaves it unchanged. How much the selection was scaled vertically. 1 leaves it unchanged. Also moves the unselected vertices near the selection, less the farther away they are. The curve the proportional influence follows as it fades out toward the edge of Proportional Size. How far the proportional influence reaches from the selection, in pixels. Limits the proportional influence to vertices joined to the selection by mesh edges, measuring distance along those edges. Where along its edge the vertex landed: 0 is where it started, and 1 is the neighboring vertex. Where the merged vertices come together: at their center, or on the first or last vertex selected. Normal Additive Multiply Additive (Legacy) Additive (Glow) Darken Multiply (Legacy) Color Burn Linear Burn Lighten Screen Color Dodge Overlay Soft Light Hard Light Linear Light Hue Color Over Atop Out Conjoint Disjoint Pass Through Grouped Isolated Reset to default Reset All Range Link with the parameter below Unlink into two sliders Drag to reorder New Group New Group Rename Delete Group Add Parameter Add Key Form Parameter Add Blend Shape Parameter Delete Parameter Discard keys Move keys to… New Parameter Only parameters the selection uses Min Default Max Settings Settings Close settings Quick Setup Continue Interface Colors Viewport Keybindings Pen Import Theme Dark Light System Language History Steps Preset Keybindings Preset Default Cubism Blender Reset to Preset Press a shortcut… Unbound Clear shortcut %1$s is already bound to “%2$s”. Reassign it? Reassign Pen configuration is coming soon. Parameter Template Align Added Artwork Watch Artwork Files Reload Automatically Notify Only Off When deleting art in the sources, also mark the layer as ignored. In the Sources area, measure layer positions from the world axes instead of the art file's top-left corner. Humanoid None Zoom Step (%) Coarse Zoom Step (%) Grid Scale Grid Subdivisions Supersampling (2x Render Quality) Keep supersampling while resizing panels Viewport Selection Highlight Active Selection Highlight Warning Pinned Placement Mesh Editing Vertex Edge Face Idle Selected Active Off-key Drawable: %1$s Part: %1$s Deformer: %1$s Keyform Sheet Insert key on which parameter? Remove key from which parameter? Select %1$s All tracks hidden by filters. Deformation Tracks Property Tracks Blend Shape Tracks Nothing is keyed on this parameter yet. Drawable Warp Deformer Rotation Deformer Part Glue Geometry Blend Shape Draw Order Opacity Multiply Screen Flip X Flip Y Glue Intensity Insert Keyframe Frame All Keys Nudge Keyframe Left Nudge Keyframe Right Delete Selected Keys Delete Keyframe Point at a keyable property to insert a keyframe. Select a parameter to key on.