Updated Readme + easy config for step sizes.

BigKnob.ino

@@ -1,6 +1,11 @@
 #define BOUNCE_LOCK_OUT
 #include <Bounce2.h>
 #include <Rotary.h>
+
+//Knob Steps
+int SmallKnob = 6;
+int BigKnob = 1;
+
 //PINS
 
 // -- Switch --
@@ -179,17 +184,17 @@ void checkDials() {
   encoder1result = encoder1.process();
   if (encoder1result) {
     if (encoder1result == DIR_CW)
-      val[state] = min(val[state] + 6, 128);
+      val[state] = min(val[state] + SmallKnob, 128);
     else
-      val[state] = max(val[state] - 6, 0);
+      val[state] = max(val[state] - SmallKnob, 0);
   }
 
   encoder2result = encoder2.process();
   if (encoder2result) {
     if (encoder2result == DIR_CW)
-      val[state] = min(val[state] + 1, 128);
+      val[state] = min(val[state] + BigKnob, 128);
     else
-      val[state] = max(val[state] - 1, 0);
+      val[state] = max(val[state] - BigKnob, 0);
   }
 
   if (val[state] != lastval[state]) {

README.md

@@ -8,10 +8,9 @@ This is the main firmware for the J6 Bigknob USB-MIDI controller, based on the T
 - 1x 3.5mm TRS Jack for footpedal
 
 
+<img src="https://i.imgur.com/eoUi0Af.jpg" />
 
-![test](https://github.com/favicon.ico | width=48)
+## Download
-
-## Usage
 
 Download + extract the repo to a local folder.
 ##### Windows
@@ -35,4 +34,38 @@ Download + extract the repo to a local folder.
 ------------
 [![Download Repo Zip](https://i.imgur.com/Ij76c4Q.png "Download Repo Zip")](https://i.imgur.com/Ij76c4Q.png "Download Repo Zip")
 
+## Usage
 
+Download + Install **Arduino IDE**
+https://www.arduino.cc/en/Main/Software
+
+Download + Install **Teensyduino** 
+https://www.pjrc.com/teensy/td_download.html
+
+Open **BigKnob.ino** in **Arduino IDE**
+
+Edit knob steps as needed (steps per tick)
+```
+//Knob Steps
+int SmallKnob = 6;
+int BigKnob = 1;
+```
+
+Change the board type to Teensy LC
+![](https://i.imgur.com/QVNE8Xh.png)
+
+Change the USB type to Serial + MIDI
+![](https://i.imgur.com/cNiXUd4.png)
+
+Might need to change port (I don't need to for mine)
+
+Upload. 
+
+## Acknowledgements
+Portions of this software were developed at http://www.pjrc.com/
+Those portions licensed under MIT License Agreement, (the "License"); You may not use these files except in compliance with the License.
+You may obtain a copy of the License at: http://opensource.org/licenses/MIT
+Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
+and limitations under the License.
+Portions Copyright (c) 2012-2018 http://www.pjrc.com/